NEWS
Home / News
  • Factors in the selection of abrasive particle size of Coated Abrasives
    2020-11-19

    The coarse grain size should be selected for the workpiece with large machining allowance and high grinding efficiency. When the machining allowance is small and the surface roughness value is low, the fine grain size should be selected. For example, P16-P24 abrasives are used for rust removal of hu

  • Characteristics of Ceramic Abrasive with Sol-Gel Method
    2020-11-19

    The ceramic abrasive with sol-gel method belongs to sintered abrasives. The grain size is very small, only 100-500mm. It is only a few million of the crystal size of ordinary corundum abrasives. A grain size #46 ceramic abrasive contains hundreds of millions of crystals. When grinding, the tradition

Copyright XUCHANG GREAT ABRASIVE CO., LTD.       备案号豫ICP备11022991号-1